Psiloc Crystal Chinese Localization v1.54 S60v3 SymbianOS9.1 Unsigned BiNPDA
[b][color=#800080]Psiloc Crystal Chinese Localization v1.54 S60v3 SymbianOS9.1 Unsigned Cracked-BiNPDA[/color][/b]Chinese characters can be entered in any text editor by choosing any one of the input methods in Options->Input method. There are five available input methods:
1. ShuangPin
2. Stroke
3. Cangjie
4. Pinyin
5. Zhuyin
If any input method is enabled, a candidate window will appear after the first key is pressed. A candidate window consists of two sections. The upper one shows possible sequences of input characters and the lower one shows possible Chinese characters corresponding to the selected character sequence.
To navigate through all of the possible sequences, use the right and left buttons. If there are more sequences than can fit in one row, vertical arrows will appear on the right side of the section. To navigate through the subsequent rows, use the up, down, right and left buttons. At any time you can delete the most recent character by pressing (c). If you delete all of the characters the window will disappear. To select a sequence press the center key and you will be moved to the character section. It is here that you can select a character that will appear in the text editor. Navigation works the same way here. To go back to a sequence building press (c). To select a character press the center key.
To enter a numeric character in alphanumeric mode on the numeric keypad depress and hold the selected key for about 2 seconds.
[b][color=red]Font magnification doesn't work on Nokia 6290, N75 and N76 due to technical reasons.[/color][/b]
[b][color=purple]Note: Remember to disable Crystal Localization and then power off your device before UPGRADING or UNINSTALLING application or DRM Common Solutions.[/color][/b]
[b][color=#800080][/color][/b]
中国汉字可以输入任何文字编辑器，选择任何一个输入法选项中， “输入法。有5个可输入方法：
1 。 ShuangPin
2 。敲击
3 。仓颉
4 。拼音
5 。珠音
如果有任何输入法是启用的候选人将出现窗口后，关键是压力。候选人窗口由两部分。上一个可能的序列显示输入字符和较低的一个可能表明中国相应的字符选定的字符序列。
若要浏览所有可能的序列，使用左，右按钮。如果有更多序列可以容纳超过一个排，垂直箭头将出现在右边的一节。若要浏览，随后行，使用上，下，左，右按钮。在任何时候您可以删除最近的性质按（ c ）项。如果您删除的所有字符的窗口将会消失。要选择一个序列新闻中心的关键，你将迁往的性质一节。正是在这里，你可以选择一个字符，将出现在文本编辑器。导航工程以同样的方式在这里。回到序列建设新闻（ c ）项。要选择一个性格新闻中心的关键。
为了输入一个数字字符字母数字模式在数字键盘上打压，并认为选择的关键约2秒钟。
字体放大不起作用的诺基亚6290 ， N75和N76因技术原因。
注意：请记住禁用晶体定位，然后切断电源之前，您的设备升级或卸载应用程序或DRM共同的解决办法。
[color=red][b]附件已修复 by 鬼[/b][/color]
[[i] 本帖最后由 eye 于 2008-10-3 13:58 编辑 [/i]] 楼主，这个附件存在问题，请检查下 附件已修复 看不懂..
i can’t speak english..
页:
[1]